Connecting batteries, Danger – MacDon M205 Operators Manual User Manual
Page 373
1. The battery main disconnect switch (A) is located on
the right-hand frame rail beside the batteries. Ensure
battery switch (A) is switched to POWER OFF position.
2. Open the right cab-forward platform to expose the
batteries. Refer to
5.5.1 Opening Platforms (Standard
.
3. Remove cable ties securing battery cables to
battery clamp.
Figure 5.142: Battery Switch
4. Position new batteries (G) on dual battery support.
NOTE:
Ensure that batteries are positioned so that the
positive posts (C) face aft.
5. Install strap (F) with bolts (E).
6. Rotate bar (B) into position and secure with bolt (A).
7. Connect battery cables. Refer to
.
8. Close the platform. Refer to
Figure 5.143: Battery Location
Connecting Batteries
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169887
357
Revision A