Display warnings and alarms – MacDon M205 Operators Manual User Manual

Page 98

Advertising
background image

OPERATOR’S STATION

Display Warnings and Alarms

Informs Operator of abnormal windrower conditions.

Figure 3.66: CDM Display Warnings and Alarms

Display (A)

Flashing

Alarm Tone

Description

BRAKE OFF

Engine running, brake solenoid
not activated

BRAKE ON

X

Short beep with each flash

Ground speed lever (GSL) out of
N-DETENT, but interlock switch
remains closed to apply brake

BRAKE SW FAILURE

X

Short beep with each flash

Ignition ON / engine not running,
brake switch and relay closed

CAB-FORWARD SW ON/
ENG-FORWARD SW ON

X

Messages flash alternately

Both seat switches activated

CENTER STEERING

Beeps at 2 per second

GSL or interlock switches not
closed with key ON / engine OFF

DISENGAGE HEADER
RE-ENGAGE <1800
RPM>

X

None

R80/R85 - Engine rpm above
1800 when engaging header

ENGINE AIR FILTER

X

Single loud tone for 10 seconds:
repeats every 30 minutes until
condition is corrected

Engine air filter requires servicing

169887

82

Revision A

Advertising