Retsch TG 200 - Manual (Page 22)

2/25/2013

Retsch GmbH
22
0002
Replacing fuses
GS
F3 F4 F2 F1
 Disconnect mains plug
 Remove 5 housing screws GS
 Place upper part of housing carefully on its side
 Remove fuse holders 1 - 4
 Check fuses and replace if necessary
 Fuse F1 = 6.3 A mT (dia. 5x20) for fan
 Fuse F2 = 6.3 A mT (dia. 5x20) for fan
 Fuse F3 = 10 A mT (dia. 5x20) for heater
 Fuse F4 = 10 A mT (dia. 5x20) for heater
Accessories
Glass drying vessel, 6 litre
Art. No. 72.783.0001
Drying vessel of stainless steel, 6 litre
Art. No. 72.783.0002
Glass drying vessel, 3 x 0.3 litre
Art. No. 72.002.0005
Spare glass drying vessel, 0.3 litre
Art. No. 02.045.0020
Spare filter bag for glass drying vessel, 0.3 litre
Art. No. 02.186.0004
Lid with filter element for 72.002.0005
Art. No. 72.107.0001
1 spare filter element
Art. No. 03.186.0024
Quick clamping lid with filter element, incl. 10 spare filters
Art. No. 72.643.0001
10 spare filters for 72.643.0001
Art. No. 72.143.0001
Quick clamping lid with filter bag
Art. No. 72.107.0002
Spare filter bag with steel ring
Art. No. 02.186.0015
Adaptor for sieve drying for Retsch analytical sieves 8“/203 mm
Art. No. 72.001.0005