Retsch TG 200 - Manual (Page 9)

2/25/2013

Retsch GmbH
9
0002
Emission
Noise characteristic values :
Noise measurement according to DIN 45635-031-01-KL3
The noise characteristic values depend on the set fan power
and the type of material to be dried.
Example:
Acoustic power level L
WA
= 88 dB(A)
Emission value related to working area L
pAeq
= 75 dB(A)
Operating conditions:
Material to be dried = clay, filling level 225 mm
Max. heating power, max. fan power
Heating power
The heating power depends on the type and quantity of material
to be dried and the set fan power.
The nominal value is 2 x 1000 W.
Basic heating takes place through the power output of the radial
fan, depending on the air flow.
Fan power
The fan power depends on the type and quantity of the material
to be dried and the accessories used.
The value is approx. 185 m³/hr at no-load operation without
material to be dried.
Rated power
At:
240V = 2990 VA
230V = 2865 VA
220V = 2740 VA
200V = 2490 VA
Systems of protection
IP43 or
IP20 without drying vessel and lid in position
Machine dimensions
Height: approx. 1000 mm, width: 400 mm, depth: 480 mm
Weight: approx. 21 kg without drying vessel
Required floor space
Width 400 mm x depth 540 mm
Safety distance of 100 mm from the rear panel is necessary.