Retsch TG 200 - Manual (Page 4)

2/25/2013

Retsch GmbH
4
0002
Safety
The TG200 is an ultra-modern, highly efficient product
from Retsch GmbH, and corresponds to state-of-the-art
technology. When using the machine according to the
intended purpose and with a knowledge of the technical
documentation described here it is completely reliable
and safe to operate.
Safety instructions
As the operating authority you must ensure that all
persons authorised to work on the TG 200:
 are aware of, and have understood all the safety
regulations,
 are aware of all the handling instructions and regulations
for the target group of relevance to them before starting
work,
 have access to the technical documentation for this
machine at all times without problems.
 Before beginning work on the TG200 new personnel must
have been made familiar with safe handling of the
machine and its operation according to the intended
purpose, either by verbal instruction from a competent
person
and/or through reading this technical
documentation.
 Improper operation can cause injury to persons and
damage to the machine. You are responsible for your
own safety and that of your employees.
 Make sure that no unauthorised persons have access to
the TG200.
For your own protection have knowledge of the
instructions for operating the TG200 confirmed by your
employees. A draft of a suitable form is given on the
page following the section on safety.
We exclude any liability for claims for damages in any form
whatsoever for injury to persons or damage to the machine
caused through non-observance of the following safety
instructions.