RKI Instruments GX-2001 Data Logging with Calibration Station - Manual (Page 38)

38 • Changing Data Logging Parameters
Changing Data Logging
Parameters
To make changes to settings stored in the Model GX-2001, use
the Set window of the GX-2001 Data Logging Software. Follow
the steps below to make these changes.
1. Launch the GX-2001 Data Logging Software.
2. Insert the Model GX-2001 into the GX-2001 Calibration
Station.
3. Turn on the Model GX-2001 to make a connection between
the Model GX-2001 and the computer.
4. In the Download window, click the Instrument Information
button to down load the instrument information from the
Model GX-2001 to the computer. You may also use one of
the downloading options (e.g., Complete Download, Interval
Download, or Alarm Trend Download).