RKI Instruments GX-2001 Data Logging with Calibration Station - Manual (Page 39)

Changing Data Logging Parameters • 39
5. Click the Set button in the Download window to display the
Set window. Use the Set window to change the instrument
information stored in the Model GX-2001.
6. To change the serial number, station ID, or user ID stored in
the Model GX-2001, click the field you wish to change (e.g.,
user ID), use the backspace key to remove the current entry,
then type the new information.
7. To change the channel parameters, click the field you wish to
change (e.g., HC AutoCal.), use the Back Space key, then
type the new information.
8. After you have finished entering new parameters, you must
upload this information to the Model GX-2001 by clicking the
Update button.
Figure 24. Set Window
Click to upload changes
to the Model GX-2001