Robustel R3000 User Guide - Manual (Page 127)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 126 / 131
Confidential
R3000> enable
Password: *****
R3000# ? //check what commands can be used in Privileged exec mode
debug Debug configure information
enable Turn on privileged commands
exit Exit from current mode
export Export file using tftp
syslog Export system log
import Import file using tftp
load Load configure information
ping Ping test
reload Halt and perform a cold restart
tracert Tracert test
write Write running configuration
tftp Copy from tftp: file system
show Show running system information
configure Enter configuration mode
end Exit to Normal mode
GLOBAL CONFIGURATION MODE:
R3000# configure
R3000(config)# ? //check what commands can be used in global configuration mode
exit Exit from current mode
end Exit to Normal mode
interface Configure an interface
set Set system parameters
add Add system parameters list
modify Modify system parameters list
delete Delete system parameters list
INTERFACE MODE:
R3000(config)# interface Ethernet 0
R3000(config-e0)# ?
//check what commands can be used in interface mode
exit Exit from current mode
end Exit to Normal mode
ip Set the IP address of an interface
mtu Set the IP address of an interface