Robustel M1000 User Guide - Manual (Page 51)

Robustel GoRugged M1000 User Guide
RT_UG_M1000 _v.2.0.0
20.12.2013 50 / 83
Confidential
4. Input AT commands on the HyperTerminal screen (e.g. type “AT” to check the “OK” response from the modem).
4.1.3 AT Commands Examples
Followings are examples of some AT commands. Please refer to the AT command guide for a full description.
Description
AT commands Modem response Comments
Receiving signal strength AT+CSQ +CSQ: 19,99 The first parameter has
to be at least 15 for
normal communication.
Saves parameters in
non-volatile memory
AT&W OK The configuration
settings are stored.