Robustel M1000 User Guide - Manual (Page 54)

Robustel GoRugged M1000 User Guide
RT_UG_M1000 _v.2.0.0
20.12.2013 53 / 83
Confidential
Note:
1. +++ is the escape sequence, and ATH is the hang-up command.
2. For international calls, the local international prefix does not need to be set, but does need to be replaced by the
+ character. E.g., you would type ATD+86123456, in which +86 is the country code.
3. User could also establish a CSD connection by using terminal software such as Windows HyperTerminal, or
Robustel Modem Configurator’s Debug Tab.
4.2.3 Answering a CSD Connection
1. To answer a call manually, when the Modem Configurator displays the RING response, type to answer a call
manually, when the Modem Configurator displays the RING response, type ATA , enable Enter and click Send.
2. After the CSD connection has been established, and the modem will be in the data mode. At this point you can
proceed with data communication.
3. To answer a call automatically, type ATS0=x and click Send, and then type AT&W and click Send in the Modem
Configurator. In this case, replace x with the number of rings that the modem receive before answering the call.