Black Box FX160A - Manual (Page 20)

PHONE LINE MANAGER 16 X 4
21
5.2.9 E NTERING THE S TANDARD I NCOMING L IST
1. In the programming mode, enter 730 for the Day Mode list or enter 790 for the Night-Mode list.
2. Enter the two-digit extension numbers (00 to 15) assigned to the Standard Incoming List.
Enter all of the extension numbers in succession. You can assign up to 16 extensions. Be sure to enter
the extensions in the order you want them to be searched.
3. Hang up. Hanging up is necessary for the assignments to register.
Keep a record of your Standard Incoming List Assignments. Write the 2-digit extension numbers in the
following table.
Extension Numbers in the Extension Numbers in the
Standard Incoming List, Standard Incoming List,
Day Mode Night Mode
Enter 730 790
1st (Operator):
2nd
3rd
4th
5th
6th
7th
8th
9th
10th
11th
12th
13th
14th
15th
16th
5.2.10 P RIVATE I NCOMING L INES
You may want to configure one or more of the outside lines to operate as a Private Incoming Line. This
would allow an incoming call to ring at an extension other than the Operator. Outside lines 2, 3, and 4 may
be defined as Private Incoming Lines. As such, you can define the list of extensions which the Phone Line
Manager 16 x 4 will search when an incoming call is detected on that line. Only one extension will ring. This
is different from outside lines defined as Standard Incoming Lines where more than one extension can ring
at the same time.