Black Box FX160A - Manual (Page 61)

PHONE LINE MANAGER 16 X 4
62
19.11 Rollover on Standard Incoming Calls Timing
For incoming calls to outside lines operating in the Standard Incoming Calls mode, this is the amount
of time an incoming call will ring at the designated extension(s) before the it will start to ring a Rollover
Extension (voice mail).
12. Enter the “Rollover on Standard Incoming Calls time” code:
0 5 seconds
1 10 seconds
2 15 seconds
3 20 seconds
4 25 seconds
5 30 seconds
6 35 seconds
7 40 seconds
8 50 seconds
* 9 60 seconds
19.12 Rollover After Call to Extension
This parameter sets the amount of time an extension will ring in certain situations before the call is
transferred to the Operator or a Rollover Extension.
An extension specified by an incoming caller in the DISA mode will ring for this amount of time before
being transferred to the Operator or a Rollover Extension.
If an extension places a call on hold for too long and then does not answer after the Phone Line Manager
16 x 4 calls back, the call will be transferred to the Operator or Rollover Extension after this amount of time.
If a call is transferred to an extension and the transferring extension hangs up (blind transfer), the call
will ring for this amount of time before being transferred to the Operator or a Rollover Extension.