Belkin PM01122EA User Manual
Page 13
11
N Wireless Router
sections
table of contents
1
2
3
5
6
7
8
9
10
CoNNeCTINg aNd CoNfIgURINg yoUR RoUTeR
4
Verify the contents of your box� you should have the following:
•
Belkin N Wireless Router
•
Quick Installation Guide
•
LED Troubleshooting Guide
•
Security Setup Guide
•
EZI Setup Assistant CD
•
Power Supply
•
RJ45 Ethernet Networking Cable (with User Manual on CD-ROM)
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port. Many modems have both an RJ45 Ethernet port and a USB
connection. If you have a modem with both Ethernet and USB, and are
using the USB connection at this time, you will be instructed to use the
RJ45 Ethernet port during the installation procedure. If your modem has
only a USB port, you can request a different type of modem from your
ISP, or you can, in some cases, purchase a modem that has an RJ45
Ethernet port on it.
setup assistant
Belkin has provided our Setup Assistant software to make installing your
Router a simple and easy task. You can use it to get your Router up and
running in minutes. The Setup Assistant requires that your computer be
connected directly to your Router and that the Internet connection is
active and working at the time of installation. If it is not, you must use
the “Alternate Setup Method” section of this User Manual to configure
your Router. Additionally, if you are using an operating system other than
Windows 2000, XP, or Vista, or Mac OS X v10.x, you must set up the
Router using the “Alternate Setup Method” section of this User Manual.
ethernet
Usb