Belkin PM01122EA User Manual
Page 83
81
N Wireless Router
sections
table of contents
1
2
3
4
5
6
7
8
10
9
TRoUblesHooTINg
3�
Select the network to which you are trying to connect and
click on “Properties”. You will see the following screen.
4�
For a home or small business user, select “WPA-PSK” under
“Network Authentication”.
5�
Select “TKIP” or “AES” under “Date Encryption”. This setting
will have to be identical to the Router that you set up.
6�
Type in your encryption key in the “Network key” box.
Important: Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
7�
Click “OK” to apply settings.
What’s the difference between 802�11g and draft 802�11n?
Currently there are three commonly used wireless networking standards,
which transmit data at very different maximum speeds. Each is based
on the designation for certifying network standards. The most common
wireless networking standard, 802.11g, can transmit information up
to 54Mbps; 802.11a also supports up to 54Mbps, but in the 5GHz
frequency; and 802.11n draft specification can connect at up to
300Mbps. See the chart on the next page for more detailed information.
(4)
(5)
(6)
(7)