Belkin PM01122EA User Manual
Page 29
27
N Wireless Router
sections
table of contents
1
2
3
4
6
7
8
9
10
5
alTeRNaTe seTUP MeTHod
(1)
(2)
(4)
(5)
(3)
(6)
setting your Internet service Provider (IsP) Connection
Type to Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only] Some ISPs require a connection using PPTP
protocol, a type of connection most common in European countries.
This sets up a direct connection to the ISP’s system. Type in the
information provided by your ISP in the space provided. When you have
finished, click “Apply Changes” (9). After you apply the changes, the
Internet Status indicator will read “connection OK” if your Router is set
up properly.
1� PPTP account
Provided by your ISP. Enter your PPTP account name here.
2� PPTP Password
Type in your password and retype it into the “Retype Password” box to
confirm it.
3� Host Name
Provided by your ISP. Enter your host name here.
4� get IP by dHCP
If your ISP provided you with a specific IP address, uncheck this box
and enter your IP address, subnet mask, and default gateway in the
fields that appear.
5� service IP address
Provided by your ISP. Enter your service IP address here.