Belkin PM01122EA User Manual
Page 68
Advertising
66
N Wireless Router
sections
table of contents
1
2
3
4
5
6
8
9
10
7
MaNUally CoNfIgURINg NeTWoRK seTTINgs
5� If “Manually” is selected,
your Router will need to
be set up for a static IP
connection type. Write
the address information
in the table below. You
will need to enter this
information into the Router.
6� If not already selected, select “Using DHCP” next to “Configure”
(4), then click “Apply Now”.
your network settings are now configured for use with the Router�
Advertising