Sensaphone IMS-4000 Upgrade instructions User Manual
Page 18
18
IMS-4000 Software Update Notice
WIRELESS NODE
The latest ConsoleView software (v3.0.31) will automatically help you select the proper firmware files for
your wireless node. If you have any questions please contact Sensaphone Technical Support for help in iden-
tifying the proper firmware for your node. Selecting the wrong file may result in a non-functioning unit.
Installing New Wireless Node Firmware
Using ConsoleView, right click on the Wireless Node and select Node Properties, then the Diagnostics tab.
Click the Upgrade button then click “Yes” to upgrade this Node. Locate and select the correct file for your
node and click Open. The file will be uploaded and installed into your node. When it finishes, click OK.
After about a minute the Wireless Node will automatically reboot and reconnect when the update is complete.
If you have further questions regarding the IMS-4000, please contact Sensaphone Technical Support at
610.558.2700 x260, or by email at [email protected]