Sensaphone IMS-4000 Upgrade instructions - Manual (Page 8)

8 IMS-4000 Software Update Notice
Version 2.98 (August 1, 2007)
• Corrected an issue which caused the SNMP agent to restart even when it was configured to be
disabled.
• Improved modem routines when making inbound voice and data connections.
• Corrected issue in web page which caused input names to be displayed incorrectly.
Version 2.94 (January 10, 2007)
• Corrected issue which caused host environmental inputs to reload template defaults on system
reboot when input 1 had a Temp Sensor (F) w/display connected.
• Corrected issue which caused host IP alarms to sometimes be incorrectly marked as redundant.
• Corrected issue which caused recurring holidays to fail to be recognized beyond the current year.
• Corrected issue which allowed profiles without a Username & Password to log-in via
the web page.
Version 2.93 (October 1, 2006)
• Corrected potential issue with datalog and eventlog download process when multiple users would
simultaneously log-in.
• Corrected issue with web page causing the Delete button not to be displayed.
• Corrected issue with web page when disabling profiles.
• Added compatibility with new modem hardware.
• Modified email subject to include “RTN” when sending Return-to-Normal alarm messages.
Version 2.90 (April 1, 2006)
• Corrected IP Alarm issue when the device status changes from Route Down to Ping Timeout.
• Modified the handling of internal system log files to better control file sizes.
Version 2.89 (February 16, 2006)
• Corrected User Code/Password programming issue in web page.
• Addressed javascript vulnerability issues in web page.
• Changed Node Name to be read-only on web page and SNMP.
• Corrected two-way e-mail issue affecting usernames.
• Corrected Node voice message issue (ID) in menu.
Version 2.87 (August 23, 2005)
• Updated SNMP agent to support additional web security parameters and node MAC address.
• Corrected issue regarding incorrect timestamps within the alarm message when Return-to-normal
alarms occurred in the node.
• Added camera view option to web page in all authenticated modes.
• Added camera association programming to web page.
• Fixed display of battery and humidity units on web page.
• Input values greyed-out on web page for nodes in a trouble condition.
Version 2.86 (June 17, 2005)
• Added SNMP process monitoring.
• Corrected issue which allows users to log in to a new unit via the web page with the default profile.
Version 2.83 (May 12, 2005)
• Added support for password protected network cameras.
• Changed web page options in the serial port Network Configuration to permit configurable
password access to view status and/or change programming via the web page.
• Corrected issue when alarm voice call was answered but not acknowledged.
IMS-4000 Software Update Notice