Summit DW2432SS Installation Manual - Manual (Page 18)

7.3 READJUSTING FOOT LEVELS
Now that the dishwasher is in the cabinet, you
must readjust the feet to bring the dishwasher
up to the required height and attach it
underneath the countertop.
1. Readjust the front foot levels with adjusting
wrench to balance the dishwasher and raise it
up under the countertop, making sure it is
level.
2. Readjust the rear foot levels with a
screwdriver to balance the dishwasher and
raise it to the required height using the
brackets supplied.
3. Attach the dishwasher underneath the
countertop with the four screws supplied ( 
1/8” x 9/16” ‒  3.5mm x 14mm). Make sure
you do not go through the top of the
countertop or damage granite.
7.4 ADJUSTING THE MOVABLE TOE KICK
Now that you have successfully installed the dishwasher,
you need to attach the toe kick. The two-piece toe kick can
be adjusted to the height and depth needed for your kitchen.
Be sure to use the slotted toe kick in the front and the other
behind it. They slide into each other.
1. Insert the movable toe kick brackets into the channel (A).
2. Make sure that the plastic tab to the left of the “L” opening
on the dishwasher has not closed the channel you will
push the bracket through.
Notice:
Be sure to notice there are a left and a right bracket.
Adjust the toe kick brackets forward or backwards so that
they will align with the kitchen toe kick (B).
16