TCI HGP - Manual (Page 4)

S T A N D A R D O P T I O N ( S )
Standard Option (S) HGP IOM Manual 4
Introduction
Safety Instructions Overview
This section provides the safety instructions which must be followed when installing, operating, and
servicing the HarmonicGuard Passive (HGP) filter. If neglected, physical injury or death may follow,
or damage may occur to the filter or equipment connected to the HGP filter. The material in this
chapter must be read and understood before attempting any work on, or with, the product.
The HGP filter is intended to be connected to the input terminals of one or more VFDs. Three-phase
power is connected to the input terminals of the HGP and power is supplied to the VFD or VFDs
through the HGP. The instructions, and particularly the safety instructions, for the VFDs, motors, and
any other related equipment must be read, understood, and followed when working on any of the
equipment.
Warnings and Cautions
This manual provides two types of safety instructions. Warnings are used to call attention to
instructions that describe steps that must be taken to avoid conditions that can lead to a serious fault
condition, physical injury, or death.
Cautions are used to call attention to instructions that describe steps that must be taken to avoid
conditions that can lead to a malfunction and possible equipment damage.
Warnings
Readers are informed of situations that can result in serious physical injury and/or serious damage to
equipment with warning statements highlighted by the following symbols:
Warning Dangerous Voltage Warning: warns of situations where high
voltage can cause physical injury and/or damage equipment.
The text next to this symbol describes ways to avoid the
danger.
Warning General Warning: warns of situations that can cause physical
injury and/or damage equipment by means other than
electrical. The text next to this symbol describes ways to avoid
the danger.
Warning Electrostatic Discharge Warning: warns of situations in which
an electrostatic discharge can damage equipment. The text next
to this symbol describes ways to avoid the danger.
Cautions
Readers are informed of situations that can lead to a malfunction and possible equipment damage with
caution statements:
Caution General Caution: identifies situations that can lead to a
malfunction and possible equipment damage. The text
describes ways to avoid the situation.
!