BT DECTfax Plus Fax Machine and digital telephone system - Manual (Page 15)

Setting up
13
Date and time
It is important that your DECTfax Plus is
always set to the correct date and time.
This information is shown on the fax received
by the addressee and is required for faxes
programmed to be sent at a later date.
Setting the date and time
1 Press OK/Menu then 2 then 1 then
OK/Menu .
The display shows the date and time
currently programmed.
2 Use the keypad to enter the date. For
example, for 7th May 1998, 9.15, press
07 05
98 09 15 .
3 Press OK/Menu to confirm the entry.
Your DECTfax Plus can now be used to send
and receive faxes.
Entering your own telephone/fax number
Your telephone/fax number can be printed at
the top of each fax you send and displayed by
the machine you are calling.
To enter your own telephone/fax number
1 Press OK/Menu then 2 then 2 . The display
shows 22 NUMBER. Press
OK/Menu .
2 Use the keypad to enter your own number,
up to a maximum of 20 digits.
To enter a space, use the
ᮣ button; to enter
a +, use the + button on the alphabetic keypad.
3 Press OK/Menu to confirm the entry.
Entering your name
You can add your name (such as the name of
your company) to be printed at the top of each
fax you send.
To enter your name
1 Press OK/Menu then 2 then 3 . The display
shows
23 NAME. Press
OK/Menu .
2 Enter your name using the alphabetic
keypad to type in the letters. You can enter a
maximum of 20 characters.
NOTE
Once the date and time have been set, if you want to
make a change press OK/Menu then 2 then 1 then
OK/Menu to access the date and time setting
function.
AB
C 2
AB
C 2
AB
C 2
DE
F 3
Use the ᮤ and ᮣ buttons to move left and right
through the display.
AB
C 2 1