Unisteer 8011430 Full Size Ford Rack & Pinion Kit 1957-1959 - Manual (Page 9)

Page 9 656150
15. You can now connect your outer ends to the steering arms. Knowing that your rack is
centered your front wheels need to be centered and as you connect the outer ends you can
get your toe adjustment close. Once they are close you can install the lock nuts provided.
Also you may install the grease fittings in the outer ends and fill with grease. With the wheels
straight you can install the steering wheel and torque to 35 ft lbs.
16. From under the car you can install the pressure and return line in place. The larger hose is
the return line and goes on the top port closest to the pinion. The smaller hose is the
pressure line and goes on the lowest port of the rack. Route the lines up the frame to the new
pump in the shortest route. You will need to install the two banjo fittings first on the rack.
Torque to 18 ft lbs and only torque down once or fittings will leak.