UVP HB-500 Minidizer User Manual
Hb-500 minidizer hybridization oven, Instruction guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Introduction
- The HB-500 Minidizer Hybridization Oven is a cost-effective, personal desktop hybridization oven with a capacity of four 35x150mm bottles, eight 50ml or 15ml conical plastic tubes. The Minidizer operates with a state-of-the-art microprocessor as well ...
- A touch-sensitive keypad and microprocessor provide accurate temperature control from ambient +10 C to 78 C. The keypad is located below a large LCD readout. Once the desired hybridization temperature is entered, the readout displays the current tempe...
- WARNING!
- There may be build up of pressure within the hybridization bottles when they are taken from ambient to hybridization temperature. To help in relieving some of this pressure, preheat the solutions and bottles. Also, ensure that bottles are opened at th...
- To assure hybridization bottles remain leak proof and pressure proof, prevent temperatures above 70 C. If temperatures above this are used without first relieving the pressure within the bottle, there is a risk that bottles will leak and/or break due ...
- If the bottles are accidentally taken above 70 C without relieving the pressure, DO NOT open the hybridizer door. Turn off the hybridizer and allow it to cool before opening the door and checking the contents of the oven. Should the bottles be used ab...
- Hybridization Oven Specifications
- Installation
- Operation
- Service Procedures
- Hybridization Techniques