UVP BioChemi System with EpiChemi II Darkroom - Manual (Page 12)

5. Mounting the Camera
1. To attach the camera bracket to the
top of the EpiChemi II darkroom,
place the black rubber gasket over
the four screw holes and align the
camera mount. Screw in the (4)
provided screws to attach the
camera mounting bracket and light
sealing gasket to the top of the
darkroom.
• Camera Mount
• Rubber Gasket
2. Unpack the camera and zoom lens
from their protective boxes and
remove the protective plugs.
3. Screw the zoom lens into the end of
the camera housing.
4. Slide the camera into the camera
bracket with the serial numbers
facing the back of the system.
Ensure that the lens is in contact
with the gasket when sliding the
camera into position.
WWW.UVP.COM US Technical Support: 1.800.452.6788
UK Technical Support: +44.0.1223.420022
12