UVP BioChemi System with EpiChemi II Darkroom - Manual (Page 7)

1. Unpack the EpiChemi II Darkroom and Benchtop transilluminator from the
packaging materials.
2. Assemble the two together by placing the transilluminator on the sliding tray
of the darkroom.
3. Plug the Transilluminator in by using the internal power cord found inside the
darkroom.
*Note: The transilluminator is powered from the inside of the darkroom,
which allows the transilluminator to be controlled from the darkroom
switches.
*NOTE: WHEN IMAGING, MAKE SURE THAT THE VIEWING WINDOW IS
CLOSED. THIS CAN INTERFERE WITH LOW LIGHT IMAGING.
WWW.UVP.COM US Technical Support: 1.800.452.6788
UK Technical Support: +44.0.1223.420022
7