UVP ChemiDoc-It TS2 Imagers - Manual (Page 20)

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 20
Touch the Open Image button to open a
saved image. Touching this button will call
up the Windows file/folder navigation
screen. Select the desired file and press
OK.
Touch the Print button to print the current
image on the default printer. If a default
printer is not installed, touching the Print
button will place the print request in
queue.
When multiple images are open, touch the
left and right arrows to scroll between the
open images on the main TS2 screen.
Turn on Auto Adjust to enable the TS2
Software to automatically adjust the
image histogram for ideal imaging results.
This function is active when the button
reads “ON” in yellow lettering.
Turn on Saturation Warning to provide a
bright yellow or red image overlay on
oversaturated areas of the image during
Live Preview. Yellow indicates mild
overexposure while red indicates extreme
overexposure.
To capture an ideally exposed image,
decrease the aperture or exposure time
until the yellow or red overlay disappears.
This function is active when the button
reads “ON” in yellow lettering.
To add a date stamp to the captured
image, touch the Time Stamp button.
This will add UVP#####mmm/dd/yyyy to
the bottom right corner of the image. This
information is NOT burned into the image
until the image is saved.
This function is active when the button
reads “ON” in yellow lettering.
Touch the Lighting and Filters button to
adjust epi illumination, transillumination
and emission filter settings. See the
“Changing Lighting and Filter Settings”
section of this manual for further
information.