UVP ChemiDoc-It TS2 Imagers - Manual (Page 22)

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 22
Touch the Aperture button to activate
lens aperture adjustment. Use the slider
bar to make adjustments to this setting.
Note that the lower the aperture setting
(the lower the f-number), the more light
will pass through to the camera’s CCD
sensor.
The current aperture setting will be
indicated below the word “Aperture” on
the button (here, the aperture is set to
“f/1.8”) as well as above the slider bar.
This function is active when the button
reads “Aperture” in yellow lettering and
the word “Aperture” appears below the
slider bar.
Touch the Histogram button to activate
image histogram adjustment. Use the
slider bar to make adjustments to this
setting. Slide the right marker toward the
left to lighten the image, or slide the left
marker toward the right to darken the
image.
This function is active when the button
reads “Histogram” in yellow lettering and
the word “Histogram” appears below the
slider bar.
Touch the Zoom button to activate lens
optical zoom adjustment. Use the slider
bar to make adjustments to this setting.
Note that the higher the zoom percentage
is, the larger the image will appear.
The current zoom setting will be indicated
below the word “Zoom” on the button
(here, the zoom is “25%”) as well as
above the slider bar.
This function is active when the button
reads “Zoom” in yellow lettering and the
word “Zoom” appears below the slider
bar.
NOTE: Optical zoom functionality is not
available on all systems. To digitally zoom
in on previewed or captured images,
connect the included USB mouse to the
TS2 system and use the center scroll
wheel on the mouse to move in and out of
the image. For more information, see the
TS2 Imager “Installation and User
Instruction” guide.