UVP ChemiDoc-It TS2 Imagers - Manual (Page 16)

GelDoc-It
TS2
and ChemiDoc-It
TS2
Imagers 16
Saving Tab
Save Format: Touch the down arrow to select the desired file save format. Save images in JPEG, TIF,
BMP, GIF or PNG file formats.
Save Images To: Select the location where images are to be saved. The black dot within the radio
button indicates which selection is activated.
Select USB to save the file to the USB drive if one is currently inserted. If a USB device is not
present, the user will be notified that a USB drive is not present when attempting to save an image.
Select Prompt for Location to prompt the user to select a file save location when attempting to
save an image. This setting will also allow the user to save using a custom file name and to
manually select the file Save Format (JPEG, TIF, BMP, GIF or PNG).
Choose Select Folder to define where the file
will be saved when attempting to save an
image. Select from any local or network drive
by touching the drop-down arrow to the right
of the file path display.
Auto Save After Capture: Set Auto Save After Capture to ON to automatically save the image after
pressing Capture on the main TS2 screen. The image will automatically save to the location
selected in the Save Images To section above once the image capture is complete.
NOTE: If the Auto Save After Capture function is set to ON, the image will automatically save
when the Capture button is pressed. If the Auto Save After Capture function is set to OFF, touch
the Save button on the main TS2 screen to manually save an image.
Auto Print After Capture: Select ON to automatically send the captured image to the default printer
after Capture is pressed on the main TS2 screen. If a default printer is not installed, the Windows
“Printers and Faxes” dialog will automatically be called up after the image is captured. Select the
desired printer in the “Printers and Faxes” dialog box and touch OK on the dialog box to print the
image.
Accept or Cancel Settings
Once all Preferences settings have been made,
touch the OK button at the bottom of the
Preferences screen to save all preferences and go
back to the main TS2 screen. Or, touch the Cancel
button to go back to the main TS2 screen without saving changes.
Changing Lighting and Filter Settings
Before capturing images, choose the appropriate lighting
and emission filter settings. Touch the Lighting and Filters
button on the main TS2 screen to call up the lighting and
filter selection menu. Select from the following tabs:

Lighting

Filters