UVP GelDoc-It TS Imaging System - Manual (Page 4)

GelDoc-It TS Imaging System 4
Printer
UV Lamp
UV/White Converter Plate
Optional Equipment
Refer to the ordering information section of this manual for
optional equipment part numbers.
Thermal Printer
The thermal printer provides archive quality, 256 grayscale
prints, and five optional cost-effective print sizes.
UV Handheld Lamps for Overhead lighting
A set of two 4-watt ultraviolet lamps can be connected inside
the darkroom for UV epi-illumination. The lamps can be
switched On/Off using the switch on the front of the
darkroom.
Converter Plates
The White Light Tray plugs into the darkroom for uniform
white light transillumination.
The UV/White Converter Plate allows imaging of non-
fluorescent stained media with an ultraviolet transilluminator.
The converter plate is specially coated to convert the 302nm
UV output to white light, rather than using a separate white
light box.
The Visi-Blue Converter Plate converts UV to 460-470nm
designed for use with blue excitation samples and SYBR
green, SYPRO orange and GFP stains.
Transilluminators
If the system does not include a transilluminator (check the
packing slip), contact UVP for ordering information or go to
UVP’s web site at
www.uvp.com . A large selection of
transilluminators is available from UVP. These units include
compact 8-watt models to our high performance FirstLight
Transilluminator.
VisionWorksLS Analysis Software
The GelDoc-It TS System can be configured with VisionWorks®LS software for analysis of gels, plates,
and membranes. The software features image enhancement, complete analysis tools and reporting
capabilities.
Mouse and Keyboard
An external keyboard and mouse can be connected to the GelDoc-It system. These components
connect to any available USB port in the back of the darkroom.