UVP GelDoc-It TS Imaging System User Manual
Page 8
Advertising
GelDoc-It TS Imaging System
8
5. Mount the lens control box on the hook
located at the back of the darkroom.
6. Plug in the serial cable from the motorized
lens to the lens control box.
7. Connect the PC connection cable to the PC
connection port on the lens control box and
plug the other end into the PC.
8. Connect the power supply to the lens control
box and into the power outlet.
Power switch for the
Lens Control Box
PC Connection on the
Lens Control Box
Power Connection on the Lens Control Box
Advertising
This manual is related to the following products: