UVP HEPA/UV PCR Systems - Manual (Page 6)

HEPA/UV3 PCR Workstation and Cabinet Page 6
Makrolon
®
Panel Assembly
1. Loosen the screws (4 per side) attaching the Makrolon
®
panel frames to the inner back panel.
2. Slide the frames for the Makrolon
® panels under the screws on the inner back assembly so that the
frames are under the shelf brackets.
3. Remove the protective film from the Makrolon
®
panels. Slide the panels into position between the
brackets and the inner back panel.
4. Press the brackets tightly against the Makrolon
®
panels.
5. Tighten all frame screws to secure the Makrolon ® panels in place.
Frames for
Makrolon
®
Panels
Makrolon
®
Panels
Shelf Bracket