Gs1 stacked omnidirectional, Gs1 truncated properties box options, Gs1 truncated – Wasp Barcode WaspLabeler +2D User Manual User Manual
Page 100: Gs1 expanded
96
Wasp Labeler User Manual
GS1 Stacked Omnidirectional
The table below lists the options available for GS1 Stacked Omnidirectional in the Properties box >
Barcode tab.
Field
Description
Symbology
Select GS1 Stacked Omnidirectional from the drop down list. For a
complete list of available symbologies along with examples and
descriptions of each, please refer to the topic
Bar Width
This setting determines density of the barcode. Increase the bar
width (applies to the individual bars in the barcode) and the density is
decreased. You might want a more dense barcode to fit on a small
label, for example. Keep in mind that a barcode that is too dense
may be harder for a scanner to read and may not be scannable at all.
Bar Height
This setting determines how tall your barcode will be. The bar height
does not affect density.
GS1 Truncated Properties Box Options
The table below lists the options available for GS1 Truncated in the Properties box > Barcode tab.
Field
Description
Symbology
Select GS1 Truncated from the drop down list. For a complete list of
available symbologies along with examples and descriptions of each,
please refer to the topic
Bar Width
This setting determines density of the barcode. Increase the bar
width (applies to the individual bars in the barcode) and the density is
decreased. You might want a more dense barcode to fit on a small
label, for example. Keep in mind that a barcode that is too dense
may be harder for a scanner to read and may not be scannable at all.
Bar Height
This setting determines how tall your barcode will be. The bar height
does not affect density.