Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 122)

118
Wasp Labeler User Manual
3.6.7 Object Data Source - Prompt at Print
Prompt at Print is used to permit keyboard entry of information onto the label during the Print process.
Prompt at Print should be considered when the label information is available only at the time of print.
The Prompt at Print Time information is not stored anywhere; it is dynamically input by the user when
the label is configured to print. Prompt at Print can be used with Text, Barcode or Picture objects.
Steps to Enable Prompt at Print for an Object
1. With the object (Text, Barcode or Picture) in the Design window,
click the Prompt at Print button on the Properties box > Data
Source tab. The following screen appears:
2. Enter a description for the prompt in the field provided. This should
be descriptive enough that the user printing the labels will know what
value to enter.
3. Click the OK button.
4. When the labels are ready to be printed, on the Print tab, click the
Print button. A Keyboard Entry screen similar to the following:
5. Any objects that are setup for a prompt appear in the top window.
Type in data in the Value field for each object that has a prompt.