Wasp Barcode WaspLabeler +2D User Manual User Manual
Page 61
Advertising
57
Wasp Labeler User Manual
If you want to change your base object, hold down the SHIFT key and click on a different object.
The blue outline will change to the newly selected object. The previous base object will still be
selected for alignment, but will no longer be the base object.
Example - Using the Align Function
You have three barcodes on your label and you want to align two of the
barcodes centered horizontally relative to the third one. Use CTRL+ click to
select the barcodes, making sure to select the barcode to which you want the
other barcodes aligned first. Your label will look similar to the following:
Advertising