Wasp Barcode WaspLabeler +2D User Manual User Manual
Page 148
Advertising
144
Wasp Labeler User Manual
5. The maximum rows included in your label defaults to 1,000. You can enter a smaller or larger
number as needed in the Max Rows field.
Enter 0 (zero) to return all rows of data. Keep in mind that a very large number of rows may
result in slower performance.
6. You can click the Test Connection button to make sure you are connected to the database. If
a connection is established, the message shown below appears:
Click OK on the Test Connection message to close it.
7. Click Apply to add the connected file to your Labeler project. The data contained in the
selected file will appear on the Data tab as shown in the example below:
8. You can now perform the following functions:
Advertising