Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 78)

74
Wasp Labeler User Manual
• Display on Print - Make sure this checkbox is selected if you want the barcode to display when
your label is printed.
• Anchor - Select where you want to anchor the barcode on the page. For example, if you set
the Anchor to Right, if the barcode grows or shrinks due to variable data from a data source,
the Right side will stay in the same position and the barcode will "grow" from the left. If you
anchor it Center, the center position will stay the same and the barcode will "grow" from the
right and left.
Format tab - Caption options are:
• Align -Select an option from the drop down list to set the alignment of your caption above or
below your barcode.
• Font - Click the ellipse button (...) to select a font for your caption. Below is an example of the
Font screen
Select the desired font from the Font Family drop down menu. Click on the desired Typeface
and font Size. A sample of your selections will appear in the Sample section.
Click OK to save your selections or Cancel to close the Font screen without saving your
selection.
Format tab - Drawing options are:
• Fore Color/Back Color - The Fore color (the color of your barcode) defaults to black. The
Back color (the background color) defaults to white. Click the ellipse button (...) to view the
color selection pop up, shown below: