Wilson Manifolds 462259 5.9 Dodge/Cummins Performance Kit User Manual
Page 11
Advertising
11
16) Re-install the fuel rail and torque down the rail bolts to 18 ft lbs. Re-connect the bottom feed
line to the fuel rail and torque down to 22 ft lbs. Note: Only the two (2) studs illustrated earlier
will be used in your final installation. Do not pay attention to the two studs closest to the head as
they have been replaced by bolts for ease of installation.
17) Re-connect injector lines #3 - #6 and torque injector line nuts to 22 ft lbs. Install the injector
line brackets to 18 ft.lbs. During the re-connection of your injector lines, be sure all your injector
lines are free of dirt to avoid fuel system contamination.
Advertising