Wilson Manifolds 462259 5.9 Dodge/Cummins Performance Kit - Manual (Page 14)

14
22) Below is what your install should look like. The last 8mm x 25 allen head bolt (indicated in
red) will take the place of the # 2 injector line holder. The picture to the left below shows what
the install should look like without the injector line bracket. The picture to the right shows the
modified # 2 injector bracket installed. Do the final alignment on the bracket and torque to 18 ft.
lbs.
23) Install #1 injector line. Install dipstick using 8mm x 10mm allen head bolt (picture varies).