Install / replace batteries – Bayer HealthCare Blood Glucose Meter MODEL Ascensia Elite User Manual

Page 11

Advertising
background image

2

Install / Replace Batteries

SECTION 1

THE BATTERIES:

The Meter uses two (3-volt lithium) batteries. These are furnished with

the Meter.

WHEN TO REPLACE:

When the battery voltage becomes weak (after approximately

1000 readings), the Meter will show a battery display (

). When this display appears, it is

time to replace the batteries (see page 40 for battery types). The Meter will continue to pro-
vide accurate results for a period of time until the batteries are exhausted. At this time, the
Meter will “lock you out” from further testing.

DIRECTIONS:

1. With the tip of a finger, press the battery compartment

lid latch toward the word “open.” Lift the lid.

2. Place the two new batteries into the battery compartment with

the “+” side up and close the lid. NOTE: If replacing batteries,
remove the old batteries from the compartment and discard.

Things to remember:

• WARNING: Keep batteries away from children. Lithium

batteries are poisonous. If swallowed, immediately
contact your physician.

• Discard batteries according to your local

environmental regulations.

• The Meter memory will not be erased when

batteries are changed.

Advertising