Bayer HealthCare Blood Glucose Meter MODEL Ascensia Elite - Manual (Page 30)

21
Introduction to Memory
SECTION 4
This section will instruct you on the use of the Ascensia E LITE ™ Meter’s memory
feature. The following questions and answers should help you learn about this
feature.
How many test results does the memory store?
The memory stores up to 20 test results, and also provides the “average” of the
Blood Glucose Test results currently stored in the memory. Both Blood Glucose Test
results and Control Test results can be stored in the memory. If 20 test results are
stored and a new one is added, the oldest test result is automatically deleted. The
newest one stored will now be #1 in memory recall.
How do I recall the stored test results?
By inserting an Ascensia E LITE ™ Check Strip into the Meter and waiting 10 seconds.
After the 10 second period, an A- appears in the display followed by the average of
all the stored test results. If a Check Strip is not available, you may use a new Test
Strip to access the memory. When you use a Test Strip, you must wait 3 minutes
after inserting the Test Strip to access the memory.