Rockwell Automation 141A Mounting Ssystem MCS Star Tutorial - Manual (Page 10)

8
Here you will enter the control voltage, the type of short-circuit coordination required,
the SCCR required, horsepower or motor FLA, the starter style and the type of mounting
module desired. Let’s choose a Type F starter which will also require the Type E spacing
adapter. Th
e starter will be mounted on the MCS Iso busbar module.
Enter the “Starter Parameters” for Motor 1 per the following example.
Scrolling down the window, you can now enter the parameters for the contactor, circuit breaker,
factory installed options and separate accessories.
Enter the “Control Circuit Data, Circuit Breaker Data and Options” per the following
example. When completed, select the [ Accept ] button .
Step 6:
Enter Starter
Parameters