Rockwell Automation 141A Mounting Ssystem MCS Star Tutorial - Manual (Page 16)

14
Sometimes you will need to move components around on the busbar rack to make the most
effi
cient use of space. Let’s move the supply module to the far right-hand side of the rack.
To move a component, press and hold the left mouse button on the object to be moved.
Th en, simply drag it to the desired position and let go of the button . You will notice that the
program only allows the supply module to be positioned to the left of the main circuit breaker.
Also, the center support moved to the right to maintain the proper support spacing.
However, the software will allow the main circuit breaker to be moved. Move the circuit breaker
to the left so it is touching (overlapping) the supply module. Th
e program will ask if you want
the circuit breaker to be positioned to the left or right side of the object it is touching.
Since we want the circuit breaker on the left side of the supply module, you would
choose the [ Left ] button . It will then position the circuit breaker automatically.
Step 10:
Moving Components