Step 5: confi guring two component starters – Rockwell Automation 141A Mounting Ssystem MCS Star Tutorial User Manual
Page 9
Advertising
7
You will notice that some parameters may be pre-loaded. Th
e supply voltage is inherited from
the busbar rack parameters. To save time, most other parameters are inherited from previous
confi gurations. It is usually good practice to place the largest loads closest to the incoming feed.
It will reduce the overall heating aff ect on the busbars.
Th
e next step is to confi gure two component starters.
First,
select the [ Product Library ] button
in the main tool bar.
In the Product Library window,
select the desired starter type
. Since Motor 1 requires a
DOL starter with no special overload requirements, you can
select the Bulletin 103S
and
select the [ OK ] button
.
Step 5:
Confi guring Two
Component Starters
Advertising