Rockwell Automation 141A Mounting Ssystem MCS Star Tutorial - Manual (Page 18)

16
Th e additional rack will be identical to the fi rst one we set up. Since the main circuit breaker was
sized for all the loads, we can feed the second rack with a supply module. To change the supply
type in the second rack,
right mouse click somewhere on the second rack . You will see a drop
down menu. Click on “Edit Rack Parameters” .
You can then change the supply type to a “supply module”.
Enter the “Supply Data” per the following example. Th en select the [ Accept ] button .
Step 12:
Changing
Supply Type