Rockwell Automation 141A Mounting Ssystem MCS Star Tutorial - Manual (Page 6)

4
In the appearing confi gurator window, select the busbar system parameters.
Here you specify the electrical standards, the units of measure you prefer to use,
supply voltage and SCCR requirements.
Enter the “System Information”
per the following example.
As you scroll down the left hand side of the window, you can now enter the rack data.
Th
is is where you enter the rack orientation, the busbar length and size, and support
information. Some items will automatically be completed, based upon previous selections.
Enter “Rack Data” per the following example.
Step 2:
Enter System
Information
Step 3:
Enter Rack Data