Rockwell Automation 1609-P10000E 8000 / 10000 VA Uninterruptible Power Supply User Manual
Page 13
12
M
AINTENANCE
,
AND
T
RANSPORTING
Replacing the Battery Module(s)
This UPS has easy to replace, hot-swappable battery modules. Replacement is a safe procedure,
isolated from electrical hazards. You may leave the UPS and connected equipment on during the
procedure.
The battery replacement procedure must include replacing all battery modules in the UPS and
connected external battery pack (s).
Typical Battery life expectancy is two to four years.
Upon battery disconnection, equipment is not protected from power outages.
Use caution when handling heavy battery modules.
Refer to Installing and Connecting the Batteries and Attaching the Front Bezel for battery replacement
procedure; reverse instructions for battery removal.
Be sure to deliver the spent battery to a recycling facility or ship it to the
manufacturer in the replacement battery packing material.
Transporting the UPS
Always disconnect the battery module(s) before shipping the UPS in compliance with U.S.
Department of Transportation (DOT) and IATA regulations.
The battery module(s) may remain in the UPS.
1. Shut down and disconnect any equipment attached to the UPS.
2. Shut down and disconnect the UPS from the power supply.
3. Unplug the battery connectors.