Chapter 5, Display screen, Overview – Rockwell Automation 1608P ProDySC User Manual, 200 A User Manual

Page 17: Figure 8 - home screen, Figure 9 - system configuration, Ch 5 - display screen, Chapter

Advertising
background image

Rockwell Automation Publication 1608P-UM003A-EN-P - September 2013

17

Chapter

5

Display Screen

Overview

The ProDySC® touch screen display is a window to voltage sags and ProDySC
protection. The display provides system status, voltage sag notification and
history, runtime statistics and system history in a simple and intuitive touch-
based user interface.

When the system first starts, a welcome screen displaying the ProDySC product
logo appears. This screen disappears after 5 seconds, when the “Home” screen
appears.

Note:

The touch screen is optimized for use with a plastic stylus or bare finger.

At installation time perform the following
steps to configure your system:

Step 1:

Press the "CONFIG" button

at the bottom of the “HOME” screen
(See

Figure 8

).

Figure 8 - Home Screen

Step 2:

Begin calibration by pressing

"CALIBRATE TOUCH SENSOR"
(See

Figure 9

).

Figure 9 - System Configuration

Advertising