Run system tests, Figure 36 - system tests, Diagnostics mode – Rockwell Automation 1608M MegaDySC User Manual, 800 Amp - 208V User Manual
Page 44: Preventative maintenance servicing
Advertising
44
Rockwell Automation Publication 1608M-UM003A-EN-P - December 2013
Chapter 6
Display Screen
Run System Tests
Press the “RUN SYSTEM TESTS” to enter the “System Tests” screen. Press “2
MINS” to run the system fans for 2 minutes (See
).
Figure 36 - System Tests
Diagnostics Mode
This is not a user function. It is numerical code protected for authorized service
personnel.
Advertising