Rockwell Automation 1503 IntelliVAC Contactor Control Module - Series C and later - Manual (Page 15)

3-2 Installation and Wiring
1503-UM052D-EN-P – June 2013
A T T E N T I O N A T T E N T I O N
The Canadian Electrical Code (CEC),
National Electrical Code (NEC), or other local
codes outline provisions for safely installing
electrical equipment. Installation MUST
comply with specifications regarding wire type,
conductor sizes, branch circuit protection,
interlocking and disconnect devices. Failure to
do so may result in personal injury and/or
equipment damage.
Arrangements The IntelliVAC is offered in two arrangements, Integral (part of a
Bulletin 1500/1900 MV controller) or as an OEM component.
Integral to an Allen-Bradley MV Controller
The IntelliVAC is available as a primary component of an Allen-Bradley
Bulletin 1500/1900 MV controller as shown in Figure 3.1.
Figure 3.1 – Typical IntelliVAC Installation within a Bulletin 1500/1900 MV Controller (Shown
with optional external capacitor)