Rockwell Automation 1394 INSTL.INSTRU.1394 TURBO FIRMW - Manual (Page 3)

Upgrading your 1394 GMC Turbo Firmware 3
Publication 1394–6.3 – November 1997
7. Select OK. The CAM Table Range to Upload window appears.
8. Enter the Cam table points you want to upload.
9. Select OK. A GML Info window appears.
10.Select OK. The program begins to up load.
11. Once the upload is complete, save the file to the appropriate
directory.
12.
If your computer is running: Go to:
Windows 95
Upgrading Firmware using
Windows 95.
Windows 3.1
Upgrading Firmware Using
Windows 3.1.
The procedures below show how to upgrade your firmware using the
HyperTerminal communication accessory that comes with
Windows 95.
Setting up HyperTerminal in Windows 95
To set up HyperTerminal:
1. Close GML or any other application that occupies the COM port
used to communicate with the 1394 GMC Turbo.
2. From the Start menu, select Programs. The Programs menu
appears.
Upgrading Firmware Using
Windows 95
t